The Class 7 MOT is for vehicles between 3,000 – 3,500 kgs in weight and is categorised as LCVs (light commercial vehicles). Vehicle owners can refer to the vehicle handbook or call customer support and share details for them to locate and share the weight of the vehicle. If there are two registration plates (manufacturer and ministry) use the latter. A Class 7 MOT is done once in 12 months if the vehicle is more than 3 years.

Checklist for a Class 7 MOT

The exterior of the vehicle

Lights: The lights will be checked for brightness and roadworthiness. It covers the front and rear light, fog and brake lights along with hazard lights and indicators. They should be in proper working condition and replaced if faulty before the MOT test.

Mirrors: Both mirrors of the vehicle must be clean, with no damages and offer unobstructed views of the road. 

Windscreen: The swept area (in front of the driver) should offer clear views with no damage or obstruction. Any cracks or chips exceeding 40 mm will lead to failing the MOT. The washers and wipers are also checked for wear and tear and effectiveness.

Tyres and Wheels: The tyre’s load index with speed rating must meet the vehicle guidelines. The structure and size of each will be checked along with their roadworthiness. They should have the right amount of pressure with no major damages and the tread must meet DVSA specifications.

Body: It will be carefully examined for corrosion or major damage and there should be no sharp protrusions.

Doors: Doors should open both externally and from within and close securely. Likewise, the pillars, hinges and catches are examined for being in a good condition. 

Registration Plates: Both front and rear registration plates must be clear, clean and securely fitted. 

VIN (vehicle identification number): The VIN must be visible easily and stamped or etched on the car chassis or body.

Car Engine

Steering and Suspension: Th steering must work correctly and will be stringently tested. There should be no damage to the steering parts or the vehicle will not clear the MOT. The suspensions are also examined for damage and corrosion etc.

Brakes: These are thoroughly checked for braking effectiveness. These include the discs, brakes, pedals and levels should be in decent condition and operating properly. Braking warning lights with any parking brake light will also be checked.

Exhaust and Emissions: The vehicle must meet the emissions requirements as per UK law. The exhaust will be checked its condition and working and there should be no fuel leaks.

The interior of the vehicle:

Seatbelts: The condition and effectiveness of the seatbelt will be stringently examined. Every fitting including the seat belt straps and locks must be in good condition and work properly.

Seats: Both the front seats must be able to be secured upright and the driver’s seat must function properly and permit any adjustments.

Horn: The horn must produce a uniform sound and be clear enough for other vehicles and passers-by to hear when honked.

Speedometer: Must be in good working condition and illuminated with the dial offering clear readings.